(WEST FARGO, N.D. – December 2014) At the 2015 World of Concrete, Doosan will exhibit a DX140LCR-3 reduced tail swing crawler excavator with hydraulic breaker attachment, and a DL250TC-3 wheel loader with pallet fork attachment.
About the DX140LCR-3 crawler excavator
The reduced tail swing Doosan DX140LCR-3 crawler excavator is designed to work close to buildings and in confined areas, such as roadways, rail lines and along roadways and bridges. Additionally, the long carriage design performs well in heavy digging and lifting operations.
Features of the DX140LCR-3 include:
“¢ Horsepower: 102 hp
“¢ Weight: 33,510 lb.
“¢ Digging depth: 19 ft. 7 in.
“¢ Dump height: 23 ft. 2 in.
“¢ Swing torque: 34,682 ft.-lb.
“¢ Arm breakout force: 13,228 lbf.
“¢ Bucket breakout force: 24,471 lbf.
Approved attachments for the DX140LCR-3 include: hydraulic breaker; clamp; ditching bucket; and plate compactor.
About the DL250TC-3 wheel loader
Versatility and visibility are two exceptional features found on the Doosan interim Tier 4-compliant DL250TC-3 wheel loader. With a hydraulic quick coupler, operators can easily change and operate a variety of attachments, including general purpose, light material or multi-purpose buckets as well as pallet forks. Additionally, a parallel-lift linkage system allows for good visibility to the work area in front of the machine when placing loads. The system keeps the work tool parallel to the ground as it is lifted, ideal for lifting pallets or loads that need to stay level.
Features of the DL250TC-3 include:
“¢ Horsepower: 172 hp
“¢ Operating weight: 31,770 lb.
“¢ Dump height: 9 ft.
“¢ Bucket breakout force: 25,980 lbf.
“¢ Bucket capacity: 3.4 cu. yd.
Approved DL250TC attachments include: light material bucket; snow pusher; quick coupler; pallet fork; multi-purpose bucket; and general-purpose bucket.
