Operator Titans Set to Clash at CONEXPO-CON/AGG

March 10, 2020
Nine regional winners to compete in Caterpillar’s Global Operator Challenge Finals the first day of the show
Caterpillar Logo 5e66fe2aa2968

The championship finals are set for the Global Operator Challenge, the largest global campaign in Caterpillar history. Nine Regional Champions from around the world will compete in Las Vegas on Tuesday, March 10, 2020, for their quest to be named the best of the best and awarded Global Operator Challenge Champion. The finals will take place at the Cat Operator Stadium inside Caterpillar’s Booth #F4455 in the new CONEXPO-CON/AGG outdoor Festival Grounds.

Thousands have participated

Caterpillar launched the Global Operator Challenge to celebrate the operators who build our world, advocate and drive awareness for the trades, and elevate solutions that address job site challenges. Seventy Cat® dealers from 30 countries, representing 22 different languages, kicked off the program by holding local operator challenges from March through September 2019. More than 10,000 operators participated in these local events.

Participants’ operating skills were put to the test through a range of machines and tasks. Operators were scored on speed, accuracy and operating best practice with penalties imposed for errors. The operator with the lowest overall time for all tasks was acknowledged as the local champion and moved onto the regional championships.

Dozens advanced to regional competitions

The regional competition challenges, designed to test skill and precision under pressure, tested not only operators’ abilities on machines they use every day but also had them adapt their skills to equipment for which they may not be as familiar. The operator had to exhibit a broad range of talents on multiple machines, including displaying their skills with advanced machine technologies.

The best local operators competed at one of three Caterpillar sites for the regional championships. North and South America regional finals were held in Clayton, N.C.; European finals in Málaga, Spain; and Asia Pacific finals in Chichibu, Japan.

North and South America:

  • A total of 32 finalists, divided into eastern and western divisions of the U.S. and Canada, competed in four machine challenges in the North American regional competition during the week of October 21, 2019. Alberta, Canada’s, Jaus Neigum, representing Finning Cat, won the Western Regional finals, while Ben Sandy of North Carolina, representing Cat dealer Gregory Poole, was the Eastern Regional Champion.

  • The following week six local champions from South America traveled to Clayton for the regional championship on four machine challenges. Marcio dos Santos Verissimo from Brasil, representing Cat dealer Pesa, emerged as the South American Champion.

Europe: Nearly 30 operators from 15 countries faced five machine skills challenges at Caterpillar’s Málaga Demonstration and Learning Center from October 7-11, 2019. After total times plus penalties were counted, the three European Regional Champions were: Ireland’s Thomas Murphy, competing through Finning Cat UK; Erik Gregoric from Slovenia, sent by Cat dealer Teknoxgroup; and Switzerland’s Bruno Grossen from Cat dealer Avesco CH.

Asia Pacific: Thirty contestants from five countries – Indonesia, Thailand, the Philippines, China and Japan – navigated two excavator challenges for the Regional Finals at the Caterpillar Demonstration and Learning Center in Chichibu, Japan, during the week of November 18, 2019. Hiroyuki Harada, representing Nippon Caterpillar, emerged as the Regional Champion from Japan. The Philippines’ Wilfren Jimenez, representing Cat dealer Monark Equipment, won the Southeast Asia Region. The Regional Champion from China was Xu Congxin of Jiangsu, representing Cat dealer Lei Shing Hong Machinery Northeast.

Global Finals first day of CONEXPO-CON/AGG

The nine finalists will compete in Las Vegas inside the Cat Operator Stadium at the new outdoor Caterpillar exhibit in Festival Grounds (Exhibit #F4455) on Tuesday morning, March 10, 2020, immediately following the grand opening of CONEXPO-CON/AGG. For those not attending the show, a live broadcast of the competition will be held on cat.com.

There will be three final machine challenges: operating a medium hydraulic excavator using GRADE 2D, a medium wheel loader with Production Management, and a Next Generation Mini-Excavator. After completion of the skills challenges, awards will be presented for the lowest time for each individual challenge, best team performance, and the announcement of the Global Operator Challenge Champion based on overall performance.

More information on the Global Operator Challenge can be found at cat.com/challenge and cat.com/conexpo.